NonStop NS2200 Series Planning Guide

The command interpreter input file (CIIN) is automatically invoked after the first processor is loaded.
The CIIN file shipped with new systems contains the TACL RELOAD * command, which loads the
remaining processors.
For default configurations of the HBA SAS ports, SAS disk enclosures, and load disks, see
“Configurations for Storage CLIMs and SAS Disk Enclosures” (page 91).
Default Naming Conventions
A NonStop NS2200 series system implements default naming conventions in the same manner as
other Integrity NonStop NS-series systems.
With a few exceptions, default naming conventions are not necessary for the modular resources
that make up a NonStop NS2200 series system. In most cases, users can name their resources at
will and use the appropriate management applications and tools to find the location of the resource.
However, default naming conventions for certain resources simplify creation of the initial
configuration files and automatic generation of the names of the modular resources.
Preconfigured default resource names are:
DescriptionExampleNaming Convention
1
Type of Object
Twentieth ESS disk drive in
the system
$ESS20$ESS numberESS disk drive
2
Twentieth SAS disk volume
in the system
$SAS20$SASnumberSAS disk enclosure/SAS CG
disk enclosure
First modular tape drive in
the system
$TAPE01$TAPE numberModular tape drive
IP CLIM/IP CLIM CG which
has the X1 attachment point
N100241N group module slot
port
IP CLIM
IP CLIM CG
to the VIO enclosure located
in group 100, module 2, slot
4, port 1
Telco CLIM/Telco CLIM CG
which has the X1 attachment
O100243O group module slot
port
Telco CLIM
Telco CLIM CG
point to the VIO enclosure
located in group 100,
module 2, slot 4, port 3
Storage CLIM/Storage CLIM
CG which has the X1
S100233S group module slot
port
Storage CLIM
Storage CLIM CG
attachment point to the VIO
enclosure located in group
100, module 2, slot 3, port
3
Ethernet connection in
location 100.2.7
G10027G group module slotEthernet
LIF for PIF at location
100.2.7.0.B
L10027BL group module slot portEthernet LIF
First TCP6SAM or TCP/IP
process for the system
$ZTC0$ZTC numberTCP/IP process
First Telserv process for the
system
$ZTN0$ZTN numberTelserv process
First Listener process for the
system
LSN0$LSN numberListener process
NoneNoneAutomatically created by
WANMGR
TFTP process
178 Default Startup Characteristics and Naming Conventions