NonStop NS2200 Series Planning Guide

on the VIO enclosure and IP or Telco CLIMs provide high-speed Ethernet links to communication
LANs.
Processor ID Assignment for the Blade Element
Each blade element contains one processor element. The maintenance entity (ME) firmware running
in the VIO enclosure assigns a number to each processor element based on its connection from
the blade element to the ServerNet-to-processor ports in slots 14.1 through 14.4 (processors 0
through 3). Therefore, fiber-optic cable connections from the blade elements to the
ServerNet-to-processor ports on the VIO enclosure determine the processor number of each blade
element.
SAS Ports to SAS Disk Enclosures
SAS disk enclosures can be connected directly to the two HBA SAS ports on a Storage CLIM. The
four SAS disk enclosures connected to DL380 G6 or DL380p Gen8 CLIMs cannot be daisy-chained.
For more information, see “Storage CLIM Devices” (page 89).
SAS Ports to SAS Tape Devices
SAS tape devices have one SAS port that can be directly connected to the HBA SAS port on a
Storage CLIM. Each SAS tape enclosure supports two tape drives. With a SAS tape drive connected
to the system, you can use the BACKUP and RESTORE utilities to save data to and restore data
from tape.
Fibre Channel Ports to ESS
ESS can be connected directly to the two (customer-ordered) HBA fibre-channel (FC) ports on a
Storage CLIM (FC ports are only supported on the NonStop NS2200 commercial system).
Fibre Channel Ports to Tape Devices
Fibre Channel tape devices can be connected directly to the two (customer-ordered) HBA
fibre-channel ports on a Storage CLIM. (FC ports are only supported on the NonStop NS2200
commercial system). With a Fibre Channel tape drive connection to a server, you can use the
BACKUP and RESTORE utilities to save data to and restore data from tape.
Storage CLIM Devices
This subsection includes:
• “Factory-Default Disk Volume Locations for SAS Disk Devices” (page 91)
• “Configuration Restrictions for Storage CLIMs” (page 91)
• “Configurations for Storage CLIMs and SAS Disk Enclosures” (page 91)
The NonStop NS2200 uses the rack-mounted SAS disk enclosure, and its SAS disk drives are
controlled through the Storage CLIM. NonStop NS2200 systems support M8381-25 SAS disk
enclosures connected to DL380 G6 or DL380p Gen8 Storage CLIMs. This illustration shows the
ports on the DL380 G6 and DL380p Gen8 Storage CLIMs:
Storage CLIM Devices 89