NonStop NS2200 Series Planning Guide

Figure 21 Two DL380 G6 Storage CLIMs, Two M8381-25 SAS Disk Enclosure Configuration
This table lists the Storage CLIM, LUN, and bay identification for the factory-default system disk
locations in the configuration of two DL380 G6 Storage CLIMs and two M8381-25 SAS disk
enclosures. In this case, $SYSTEM, $DSMSCM, $AUDIT, and $OSS are configured as mirrored
SAS disk volumes:
Backup and Mirror CLIMPrimary and Mirror-Backup CLIMDisk Volume Name
100.2.3.3100.2.3.1$SYSTEM
100.2.3.3100.2.3.1$DSMSCM
100.2.3.3100.2.3.1$AUDIT
100.2.3.3100.2.3.1$OSS
1
1
If you have ordered $OSS, you need a 4 pair disk configuration
For an illustration of the factory-default slot locations for a SAS disk enclosure, see “Factory-Default
Disk Volume Locations for SAS Disk Devices” (page 91).
Two DL380 G6 Storage CLIMs, Four M8381-25 SAS Disk Enclosures
This illustration shows example cable connections for the two DL380 G6 Storage CLIM, four
M8381-25 SAS disk enclosures configuration. This configuration uses two SAS HBAs in slots 2
and 3 of each DL380 G6 Storage CLIM.
92 System Configuration Guidelines for NonStop NS2200 Systems