NonStop NS2200 Series Planning Guide

Two DL380p Gen8 Storage CLIMs, Two M8381-25 SAS Disk Enclosures
This illustration shows example cable connections between the two DL380p Gen8 Storage CLIM,
two M8381-25 SAS disk enclosure configuration.
Figure 24 Two DL380p Gen8 Storage CLIMs, Two M8381-25 SAS Disk Enclosure Configuration
This table lists the Storage CLIM, LUN, and bay identification for the factory-default system disk
locations in the configuration of two DL380p Gen8 Storage CLIMs and two M8381-25 SAS disk
enclosures. In this case, $SYSTEM, $DSMSCM, $AUDIT, and OSS are configured as mirrored
SAS disk volumes:
Mirror Disk Location
in Mirror SAS
Enclosure
Primary Disk
Bay in
Primary SAS
Enclosure
Mirror
LUN
Primay
LUN
Mirror-Backup
CLIM
Mirror
CLIM
Backup
CLIM
Primary
CLIM
Disk
Volume
Name
11201101100.2.5.3.1100.2.5.3.3100.2.5.3.3100.2.5.3.1$SYSTEM
22202102100.2.5.3.1100.2.5.3.3100.2.5.3.3100.2.5.3.1$DSMSCM
33203103100.2.5.3.1100.2.5.3.3100.2.5.3.3100.2.5.3.1$AUDIT
44204104100.2.5.3.1100.2.5.3.3100.2.5.3.3100.2.5.3.1$OSS
For an illustration of the factory-default slot locations for a SAS disk enclosure, refer to
“Factory-Default Disk Volume Locations for SAS Disk Devices” (page 91).
Storage CLIM Devices 95