NonStop NS2400 Series Planning Guide

This illustration shows the slot and connector locations from the VIO modules to two IP CLIM CGs:
NOTE: The Telco CLIM CG connections are the same as the IP CLIM CG connections.
Figure 41 IP CLIM CG or Telco CLIM CG Connections to VIO Enclosures
System Installation Document Packet
To keep track of the hardware configuration, internal and external communications cabling, IP
addresses, and connect networks, assemble and retain as the systems records an Installation
Document Packet. This packet can include:
• “Technical Document for the Factory-Installed Hardware Configuration ” (page 120)
• “Configuration Forms for the CLIMs and ServerNet Adapters ” (page 121)
Technical Document for the Factory-Installed Hardware Configuration
Each new NonStop NS2400 series system includes a document that describes:
• The cabinet included with the system
• Each hardware enclosure installed in the cabinet
• Cabinet U location of the bottom edge of each enclosure
• Each ServerNet cable with:
Source and destination enclosure, component, and connector◦
◦ Cable part number
◦ Source and destination connection labels
This document is called a technical document and serves as the physical location and connection
map for the system.
120 NonStop NS2400T and NS2400ST Systems Overview