NonStop NS2400 Series Planning Guide

Specifications for NonStop NS2400ST System Components
NOTE: All specifications assume an enclosure that is fully loaded.
Blade Element CG (rx2800 i4)
For details about the rx2800 i4 server, see the HP Integrity rx2800 i4 Server User Service Guide
at:
http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03595119-2.pdf
Fuse Panel Specifications
ValueSpecification
Enclosure Dimensions
2UU Height
1.8 in (4.6 cm)Height
19 in (48.3 cm)Width
30.5 in (77.5 cm)Depth (including safety cover)
25 in (63.5 cm)Depth (without safety cover)
Enclosure Weight
16 lbs (7.3 kg)Weight, unboxed
Outputs
4Number of TPA (maximum 50A rating) outputs per power
rail
5Number of GMT (maximum 15A rating) outputs per power
rail
80AMax total load rating
Input requirements
-48/-60 VDCNominal voltage
-36VDC to -72VDCOperating voltage
80A per inputMax input rating
2Total inputs
As appropriate for maximum total load rating.Site branch circuit protection
Heat Dissipation
1
239 BTU/hourUnit heat (single line powered)
479 BTU/hourUnit heat (both lines powered)
1
Maximum value. Assumes full load per side of 70W
Fuse Panel Ground Connections
The fuse panel requires a separate ground connection from the chassis to the cabinet grounding
rail. The fuse panel has two grounding locations at the bottom of the panel. Ground cables connect
from these points to the ground rails. For detailed information about connecting these ground
cables, ask your HP service provider to refer to the NonStop NS2200 Series and NS2400 Series
Hardware Installation Manual.
Specifications for NonStop NS2400ST System Components 139