NonStop NS2400 Series Planning Guide

DescriptionExampleNaming Convention
1
Type of Object
NoneNoneAutomatically created by
WANMGR
WANBOOT process
Tenth SWAN/SWAN 2
concentrator in the system
S10S numberSWAN/SWAN 2
concentrators
3
1
For more information about CLIM processes that use the CIP subsystem and the naming conventions for these processes,
see the Cluster I/O Protocols (CIP) Configuration and Management Manual.
2
ESS is only supported on the NonStop NS2400 commercial system.
3
Swan and SWAN 2 concentrators are only supported on the NonStop NS2400 commercial system.
On new NonStop systems, only one of each of these processes and names is configured:
• TCP6SAM - $ZTC0
• Telserv - $ZTCN0
• Listener - $LSN0
No TFTP or WANBOOT process is configured for new NonStop systems.
NOTE: Naming conventions or configurations for the dedicated service LAN TCP/IP are the same
as the TCP/IP conventions used with G-series and H-series RVUs. The names are $ZTCP0 and
$ZTCP1. HP does not support changing the names of these processes.
OSM Service Connection provides the location of the resource by adding an identifying suffix to
the names of all the system resources. Other interfaces, such as SCF, also provide means to locate
named resources.
Default Naming Conventions 169