NonStop NS2400 Series Planning Guide

These tables show the default numbering for the blade elements of a NonStop NS2400 system
when blade elements are powered on and functioning.
NOTE: In OSM, if a blade element is not present or is powered off, processors might be
renumbered. For example, if processor 2 has been removed, processor 3 becomes processor 2
in OSM displays.
GMS Numbering Displayed in the OSM Service Connection:
Port (Slot 2 only)SlotModuleGroup*Processor ID
ProcessorBlade
Element
X1, PCI adapter card.
(physical PCI slot 1)
10014000
Y
10114011
3 – 4, power supplies.
(physical power supplies 1
and 2)
10214022
10314033
32 – 37, fans (physical fans
1 through 6)
*In OSM, the term Blade Complex is used for the group.
GMS Numbering Displayed in the OSM Low-Level Link:
SlotModuleGroup*Processor ID
11004000
11014001
11024002
11034003
*In OSM, the term Blade Complex is used for the group.
The form of the GMS numbering for a blade element displayed in the OSM Service Connection
is:
This illustration shows the physical GMS numbering for the rear view of a blade element:
38 NonStop NS2400 System Overview