NonStop NS2400 Series Planning Guide

enclosures. In this case, $SYSTEM, $DSMSCM, $AUDIT, and OSS are configured as mirrored
SAS disk volumes:
Mirror Disk Location
in Mirror SAS
Enclosure
Primary Disk
Bay in
Primary SAS
Enclosure
Mirror
LUN
Primay
LUN
Mirror-Backup
CLIM
Mirror
CLIM
Backup
CLIM
Primary
CLIM
Disk
Volume
Name
11201101100.2.5.3.1100.2.5.3.3100.2.5.3.3100.2.5.3.1$SYSTEM
22202102100.2.5.3.1100.2.5.3.3100.2.5.3.3100.2.5.3.1$DSMSCM
33203103100.2.5.3.1100.2.5.3.3100.2.5.3.3100.2.5.3.1$AUDIT
44204104100.2.5.3.1100.2.5.3.3100.2.5.3.3100.2.5.3.1$OSS
Four DL380p Gen8 Storage CLIMs, Four M8381-25 SAS Disk Enclosures
This illustration shows example cable connections for the four DL380p Gen8 Storage CLIM, four
M8381-25 SAS disk enclosures configuration. This configuration uses two SAS ports in slot 2 of
each DL380p Gen8 Storage CLIM to connect to the P1 ports on each SAS disk enclosure I/O
module.
Figure 26 Four DL380p Gen8 Storage CLIMs, Four M8381-25 SAS Disk Enclosure Configuration
This table lists the Storage CLIM, LUN, and bay identification for the factory-default system disk
locations in the configuration of four DL380p Gen8 Storage CLIMs and four M8381-25 SAS disk
92 System Configuration Guidelines for NonStop NS2400 Series Systems