NonStop Servlets for JavaServer Pages (NSJSP) 5.0 System Administrator's Guide

NonStop Servlets for JavaServer Pages (NSJSP) System Administrator’s Guide—525644-003
2-1
2 Installing NSJSP
This section describes:
•
Before You Begin the Installation on page 2-1
•
Begin the Installation on page 2-2
•
Starting or Restarting NSJSP on page 2-5
•
Stopping NSJSP on page 2-5
•
Uninstalling NSJSP on page 2-7
•
NSJSP Directory Structure on page 2-7
The procedure for installing NSJSP software depends on the distribution medium for
the product. Check the readme.txt file if you have received the software on a CD.
Check the softdoc if you are installing the product from a tape. The following
installation instructions are correct as of the time this manual was published; however,
the readme.txt file or softdoc supersedes the information here.
Before You Begin the Installation
•
Ensure that the following software is installed and configured before you install
NSJSP:
°
The OSS environment on a NonStop system running NonStop operating
system H06.03 or later.
°
NonStop Server for Java (NSJ) 4.2 or later, as described in the NonStop
Server for Java (NSJ) Programmer’s Reference.
°
iTP Secure WebServer 6.0 SPR ACA or later. Note that you will need to restart
the iTP Secure WebServer after installing NSJSP.
•
Ensure that the requirements for using this product are met (see the iTP Secure
WebServer System Administrator’s Guide or the NSJSP Readme file).
•
Ensure that the prerequisites for the installation utility and any product-specific
installation requirements are met (see the NSJSP Readme file).
•
Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on the product CD)
containing the IPSetup User Guide, which provides instructions for using IPSetup,
a utility provided on the CD that enables installation of Independent Products. You
need Adobe Acrobat Reader (available on the product CD) to read or print the
IPSetup User Guide.
•
To fully deploy the product pax file into the OSS space, ensure that the “Extract
files from ustar archives to OSS file-system” option is selected when prompted.