NonStop Servlets for JavaServer Pages (NSJSP) 6.1 System Administrator's Guide

NonStop Servlets for JavaServer Pages (NSJSP) 6.1 System Administrator’s Guide—596210-006
2-1
2 Installing NSJSP
This chapter discusses the NonStop Servlets for JavaServer Pages (NSJSP)
installation script and the prerequisites for NSJSP. This chapter also describes the
procedures to install, update, and remove NSJSP and the NSJSP Manager.
For more information on iTP Secure WebServer and its TS/MP environment, see the
iTP Secure WebServer System Administrator’s Guide.
This chapter discusses the following topics:

Prerequisites on page 2-1

Installing NSJSP from the CD on page 2-2

Creating an NSJSP Installation on page 2-16

Creating an NSJSP Manager Installation on page 2-21

Updating an NSJSP Installation on page 2-24

Removing an NSJSP Configuration on page 2-25

Support for Multiple NSJSP Installations in a Single iTP Secure WebServer
Environment on page 2-26
Prerequisites
Before installing NSJSP 6.1, ensure that the following products are installed on your
NonStop system:

One of the following NonStop operating systems:

J06.04 or later J-series

H06.15 or later H-series

OSS subsystem

iTP Secure Webserver 7.0 (T8996H02 or T8997H02) or later

NSJ 5.1 (SPR ABS or later of T2766H51) or NSJ 6.0 (SPR ABP or later of
T2766H60)
Note. NSJSP operates with both iTP Secure WebServer and iTP WebServer. Although this
chapter primarily mentions the iTP Secure WebServer, those references apply to the basic iTP
WebServer as well. You can install NSJSP in either version of the iTP WebServer.
In the NSJSP context, an iTP Secure WebServer installation creates a TS/MP environment
with a PATHMON (or two, if a Pathway domain is configured). Therefore, references to the iTP
Secure WebServer environment in this chapter will also include the associated TS/MP
environment.