NonStop Servlets for JavaServer Pages (NSJSP) 6.1 System Administrator's Guide

Installing NSJSP
NonStop Servlets for JavaServer Pages (NSJSP) 6.1 System Administrator’s Guide—
596210-006
2-8
Running the IPSetup Program
c. Select the communication mode.
For a secure mode of communication, select SSH. Otherwise, accept the
default Telnet, which sends data in an unsecure mode.
For Telnet mode, enter the logon service that will call the Safeguard prompt.
The default service is TACL.
a. Click Next >.
Note. Starting with T0316H01^AAK (version 4.1.00.0), IPSetup supports two modes
of communication: Telnet and Secure SHell (SSH). To use the SSH mode of
communication, ensure that the SSH server is configured correctly and is running on
the NonStop server. If the SSH server is not configured or not running on the NonStop
server, you will not be allowed to proceed with this mode of communication.
Note.

HP recommends that you do not change the default service value unless it is
required.

The following are the default port numbers:

SSH port — 22

Telnet port — 23

FTP port — 21
For additional port numbers, consult the system administrator.