NonStop Servlets for JavaServer Pages (NSJSP) 6.1 System Administrator's Guide

Installing NSJSP
NonStop Servlets for JavaServer Pages (NSJSP) 6.1 System Administrator’s Guide—
596210-006
2-23
Verifying the NSJSP Manager Application
Installation
Verifying the NSJSP Manager Application Installation
After you have installed the NSJSP Manager application, the iTP Secure WebServer
must be cold started for the changes to take effect. You can verify the installation by
accessing the NSJSP Manager application login page. The setup script displays the
URL of the login page after completing the installation.
To access the NSJSP Manager application, complete the following steps:
1. Run the start script from the <iTP Installation Directory>/conf
directory of the iTP Secure WebServer that was specified during installation of the
NSJSP Manager application:
OSS: cd <iTP Installation Directory>/conf
OSS: ./start
2. Enter the URL for the NSJSP Manager application into your browser.
The URL must be in the following format:
http://IP address:Port number/manager
For example:
http://15.148.2.1:1088/manager
where,
15.148.2.1 specifies the IP address.
1088 specifies the Port number.
manager is the NSJSP Manager server class name.
The NSJSP Manager login page appears.
Figure 2-3
shows the NSJSP Manager application login page.
Note. If the iTP Secure WebServer is in the running state while installing the NSJSP
Manager application, you must stop it and then run the start script.
Note. The URL of the NSJSP Manager application can also be retrieved from the
<NSJSP Manager Installation Directory>/install.log file.