OSI/FTAM Configuration and Management Manual

About This Manual
OSI/FTAM Configuration and Management Manual—421944-001
xx
Related Manuals
Related Manuals
The following manuals contain helpful information on Tandem FTAM and related
products.
These manuals provide information on underlying OSI subsystems:
•
The OSI/AS Configuration and Management Manual describes how to install,
configure, and manage OSI/Application Services (OSI/AS). This manual also
includes information on monitoring and adjusting OSI/AS to optimize performance
and information on diagnosing and fixing problems.
•
The OSI/AS SCF Reference Manual describes the Subsystem Control Facility (SCF)
commands that are used to configure and control the OSI/AS subsystem. This
manual also describes the SCF commands used to display OSI/AS configuration and
status information and the OSI/AS subsystem-specific PTrace commands used to
format and display trace records.
•
The OSI/TS Configuration and Management Manual is intended for programmers,
system managers, and system operators. It describes how to write Transport Layer
applications that use the Tandem OSI/Transport Services (OSI/TS) software to
communicate with remote transport users across an OSI network. It also describes
how to configure the Tandem OSI/TS subsystem and how to diagnose configuration
and performance problems.
•
The OSI/TS SCF Reference Manual describes the SCF commands that are specific to
the Tandem OSI/TS data communications subsystem. These commands are used to
configure and control the OSI/TS subsystem. This manual also describes the SCF
commands used to display OSI/TS configuration and status information and the
OSI/TS subsystem-specific PTrace commands used to format and display trace
records.
•
The TLAM Configuration and Management Manual tells system and network
managers how to install and manage local area networks (LANs) that are connected
to Tandem NonStop systems by way of the Multilan and Tandem LAN Access
Method (TLAM) software. This manual is necessary only if you use LAN-based
communications. TLAM supports D4x-series releases.