RDF System Management Manual for H-Series RVUs (RDF 1.8)

Table 4-2 RDFCOM Operational Commands (continued)
FunctionObjectCommand
Starts all updater processes on the
backup system.
UPDATESTART
Lists current information about RDF
processes.
{ MONITOR } { RDF } {
EXTRACTOR } { RECEIVER } {
PURGER } { PROCESS } {
VOLUME } { RTDWARNING } {
RDFNET }
STATUS
Stops RDF.
RDFSTOP
Signals the end of all necessary load
and BACKUP operations during online
database synchronization.
SYNCHSTOP
Stops all updater processes on the
backup system.
UPDATESTOP
Initiates an RDF takeover operation on
the backup system.
- -TAKEOVER
Unpins TMF audit-trail files on the
primary system
- -UNPINAUDIT
Validates the current parameter values
in the RDF configuration file.
CONFIGURATIONVALIDATE
Utility Commands
RDFCOM utility commands and their functions are listed in Table 4-3. All of these commands
can be issued by anyone.
Table 4-3 RDFCOM Utility Commands
FunctionObjectCommand
Terminates an RDFCOM session.- -
EXIT
Enables you to edit (fix) a previously
issued command.
- -
FC
Displays help text for commands and
messages.
{ABBREVIATIONS } {ALL } {command
} {message-number}
HELP
Displays the 10 most recently issued
RDFCOM commands.
- -
HISTORY
Causes RDFCOM to read commands
from the specified command file.
filenameOBEY
Sets the RDF control subvolume to
$SYSTEM.control-subvolume,
thereby setting up RDF for access to
that configuration.
control-subvolumeOPEN
Redirects subsequent session output
to the specified device or file.
filenameOUT
Running RDFCOM 107