RDF System Management Manual for H-Series RVUs (RDF 1.8)

SET EXTRACTOR PRIORITY 185
SET EXTRACTOR PROCESS $MEX1
SET EXTRACTOR RTDWARNING 60
ADD EXTRACTOR
SET RECEIVER ATINDEX 0
SET RECEIVER CPUS 3:2
SET RECEIVER EXTENTS (100,100)
SET RECEIVER PRIORITY 185
SET RECEIVER RDFVOLUME $DATA11
SET RECEIVER SLOWMODE OFF
SET RECEIVER PROCESS $MR41
ADD RECEIVER
SET PURGER CPUS 3:2
SET PURGER PRIORITY 185
SET PURGER PROCESS $RP40
SET PURGER RETAINCOUNT 5
SET PURGER PURGETIME 60
ADD PURGER
SET IMAGETRAIL ATINDEX 0
ADD IMAGETRAIL $DATA06
SET NETWORK PRIMARYSYSTEM \RDF04
SET NETWORK BACKUPSYSTEM \RDF06
SET NETWORK REMOTECONTROLSUBVOLUME RDF04
SET NETWORK PNETTXVOLUME $DATA07
ADD NETWORK
SET NETWORK PRIMARYSYSTEM \RDF05
SET NETWORK BACKUPSYSTEM \RDF06
SET NETWORK REMOTECONTROLSUBVOLUME RDF05
SET NETWORK PNETTXVOLUME $DATA08
ADD NETWORK
SET RDFNET CPUS 0:2
SET RDFNET PRIORITY 165
SET RDFNET PROCESS $MNET
ADD RDFNET
SET VOLUME ATINDEX 0
SET VOLUME CPUS 1:2
SET VOLUME IMAGEVOLUME $DATA06
SET VOLUME PRIORITY 185
SET VOLUME PROCESS $RU43
SET VOLUME UPDATEVOLUME $DATA07
ADD VOLUME $DATA07
RESET VOLUME
Sample Non-Network Master Configuration
The configuration that follows is for an RDF subsystem running from \RDF05 to \RDF06, where
the network master is \RDF04:
SET RDF SOFTWARELOC $SYSTEM.RDF
SET RDF LOGFILE $0
SET RDF UPDATERDELAY 10
SET RDF UPDATERTXTIME 60
SET RDF UPDATERRTDWARNING 60
SET RDF UPDATEROPEN PROTECTED
SET RDF NETWORK ON
SET RDF NETWORKMASTER OFF
SET RDF UPDATEREXCEPTION OFF
286 Network Transactions