RDF System Management Manual for H-Series RVUs (RDF 1.8)

errnum
is a file-system error number.
procname
is the name of an extractor process.
Cause The specified error was returned when the lockstep gateway attempted to open the
RDF extractor.
Effect The gateway continues trying to open the extractor and will repeat this message every
five minutes until the open is successful.
Recovery This is an informational message. If you want lockstep operations to resume, and
if your RDF subsystem is not currently running, you must restart the subsystem.
23
Position error errnum returned when attempting to position in lockstep
file filename.
errnum
is a file-system error number.
filename
is the name of a lockstep file.
Cause The specified error was returned when the lockstep gateway attempted to position
into the lockstep file.
Effect The lockstep gateway stops.
Recovery SCF automatically restarts the gateway. If the problem persists and the autorestart
count is exhausted, correct the condition that caused the error and then restart the gateway.
24
Error errnum returned when attempting to lock the lockstep file filename.
errnum
is a file-system error number.
filename
is the name of a lockstep file.
Cause The specified error was returned when the lockstep gateway attempted to lock the
specified file.
Effect The lockstep gateway stops.
Recovery SCF automatically restarts the gateway. If the problem persists and the autorestart
count is exhausted, correct the condition that caused the error and then restart the gateway.
25
Lockstep operations ENABLED for RDF extractor procname.
procname
is the name of an extractor process.
Cause Lockstep processing is enabled for the specified RDF extractor.
Effect Lockstep processing is enabled.
Recovery This is an informational message; no recovery is required.
26
Lockstep operations DISABLED for RDF extractor procname.
procname
is the name of an extractor process.
Cause Lockstep processing is disabled for the specified RDF extractor.
Effect Lockstep processing is disabled.
340 Messages