RDF System Management Manual for H-Series RVUs (RDF 1.8)

Cause An RDF process encountered an error while attempting to read an image file.
Effect This is a catastrophic error; the process abends, and RDF stops.
The message includes the error number returned by the READ system procedure, followed
by the file name.
Recovery Restart RDF. If the condition persists, you might have to reinitialize RDF.
Preserve the designated image file and report the problem to your service provider.
800
Image trail file write error error on filename
error
is the file-system error number that identifies the specific error.
filename
is the name of the image file associated with the error.
Cause The receiver process encountered a file-system error while attempting to write to the
specified file.
Effect The message includes the error number returned by the WRITE system procedure
followed by the file name.
For error 43 (unable to obtain disk space for extent), the receiver retries the write operation.
All other errors are fatal; the receiver abends, and RDF stops.
Recovery The only recovery from an error 43 condition is to free some disk space. You can
do that by purging unused files, by using FUP DEALLOCATE to deallocate unused extents
(not for image files), or by using DCOM to move extents so that small free areas are combined
into a larger free space.
801
Internal error code
code
is an internal error code that provides further information about the error.
Cause An RDF process has detected an internal inconsistency.
Effect This error should never occur and is fatal to RDF.
Recovery Restart RDF. If the problem persists, then you will need to reinitialize RDF and
report the error to your service provider.
802
Image trail file has bad RDF header record filename
filename
is the name of the image file associated with the error.
Cause An RDF process has encountered a bad header in an image file.
Effect A bad header indicates that the image file has been corrupted.
This is a catastrophic error; the process abends, and RDF stops.
Recovery Restart RDF. If the problem persists, then you will need to reinitialize RDF and
report the error to your service provider.
803
Position error error on filename
error
is the file-system error number that identifies the specific error.
filename
is the name of the affected file.
Cause The RDFNET process has encountered the specified error on the specified file.
364 Messages