RDF System Management Manual for H-Series RVUs (RDF 1.8)

Cause The RDF monitor was unable to find an extractor configuration record when
performing a START RDF command. The ATINDEX value in the message indicates the
audit-trail index for the extractor.
Effect The START operation fails and RDF shuts down.
Recovery Use the SET and ADD commands to create an extractor configuration record and
then retry the START RDF command.
825
Missing RDF receiver config record, ATINDEX audit-trail-index
Cause The RDF monitor was unable to find a receiver configuration record when executing
a START RDF command. The ATINDEX value in the message indicates the audit-trail index
for the receiver.
Effect The START operation fails and RDF shuts down.
Recovery Use the SET and ADD commands to create a receiver configuration record and
then retry the START RDF command.
826
Missing RDF updater CONFIG record
Cause The RDF monitor was unable to find an updater configuration record when performing
a START RDF command.
Effect The START operation fails and RDF shuts down.
Recovery Use the SET and ADD commands to create one or more updater configuration
records.
827
RDF version incompatible with TMF
Cause The RDF process is not compatible with the audit format being generated by TMF.
Effect RDF stops.
Recovery Restart RDF under the correct version of the operating system and/or TMF.
828
Killing backup process ...
Cause The primary process of a process pair has detected a problem in communicating with
the backup process. An earlier message will have indicated the communications problem.
Effect Because of the severity of the problem, the primary process attempts to stop the
backup process. If the backup process stops, the primary process then attempts to create a new
backup process.
Recovery This is an informational message; no recovery is required.
829
An RDF takeover operation was initiated on the backup system
Cause This message indicates that the monitor detected an RDF takeover operation was
executed on the RDF backup system.
Effect This is a catastrophic error and will cause the RDF processes on the primary system
to stop.
Recovery You must reinitialize RDF and you might need to synchronize your databases.
830
Warning - Network down when stopping process name
RDF Messages 369