RDF System Management Manual for H-Series RVUs (RDF 1.8)

name
is the name of the RDF process that was not stopped.
Cause The RDF monitor is attempting to stop a process on the backup node but cannot do
so because the communications lines are down.
Effect If a STOP RDF command was being processed, the RDF monitor continues with the
shutdown, and all processes on the primary system will stop. The backup processes will remain
running.
Recovery To stop the RDF processes on the backup system, you must run RDFCOM on the
backup system and issue a second STOP RDF command.
Once all processes have stopped, RDF can be restarted when the network is restored.
831
RDF fatal error information text
text
is the stack trace.
Cause An RDF process is terminating abnormally.
Effect The equivalent of an INSPECT TRACE is written and then the process will abend.
Recovery This message gives your service provider information about the state of a process
that is terminating abnormally.
You might be able to correct the underlying problem and restart RDF. Otherwise it might be
necessary to reinitialize RDF.
832
Open error error on filename
error
is the file-system error number that identifies the specific error.
filename
is the name of the affected file.
Cause The RDFNET process obtained the specified error in attempting to open the specified
file.
Effect The RDFNET process restarts.
Recovery You should determine the nature of the error and take corrective action.
833
Filtered audit of unknown type, type
type
specifies the type of audit.
Cause The extractor encountered an audit record it did not recognize.
Effect This is a fatal error; RDF shuts down.
Recovery This message probably is the result of running on a primary system that has had
an audit trail created for a version of TMF that RDF does not support. The message could also
mean that the audit-trail file was corrupted by some program other than TMF, or that an
irrecoverable system error has occurred.
In any event, you will have to reinitialize the TMF and RDF.
Save the audit trail, and report this error to your service provider.
834
Purge pass terminated prematurely. Reason: reason
reason
is a reason code.
370 Messages