RDF System Management Manual for H-Series RVUs (RDF 1.8)

Cause The named RDF process has encountered the specified error when attempting to
begin a new transaction.
Effect The process either restarts or abends, depending on the error.
Recovery See the description of BEGINTRANSACTION errors in the TMF Application
Programmer's Guide and take appropriate corrective action, if necessary.
860
Fatal error error on BEGINTRANSACTION encountered
error
is an error number.
Cause The named RDF process has encountered the specified error when attempting to
begin a new transaction.
Effect The process abends and RDF will abort.
Recovery See the description of BEGINTRANSACTION errors in the TMF Application
Programmer’s Guide and take appropriate corrective action.
861
Extractor processname RTD (rtd) exceeds RTD warning threshold
(threshold#)
processname
is an extractor process name.
rtd
is an RTD value.
threshold#
is an RTDWARNING warning threshold value.
Cause The extractor has fallen behind the configured RTDWARNING threshold specified
in the RDF configuration.
Effect The extractor continues normal processing.
Recovery This is an informational message. You should, however, try to determine why the
extractor has fallen behind and take corrective action if necessary.
862
Updater processname RTD (rtd) exceeds RTD warning threshold (threshold#)
processname
is an updater process name.
rtd
is an RTD value.
threshold#
is an RTDWARNING warning threshold value.
Cause The specified updater has fallen behind the configured updater RTDWARNING
threshold.
Effect The updater continues normal processing.
Recovery This is an informational message. You should, however, try to determine why the
updater has fallen behind and take corrective action, if necessary.
863
Missing RDFNET CONFIG record
Cause The RDF monitor process was unable to find the RDFNET configuration record when
performing a START RDF command.
Effect The START RDF operation fails and RDF shuts down.
376 Messages