RDF System Management Manual for H-Series RVUs (RDF 1.8)

872
Warning; Lockstep operation is denied
Cause An application has attempted an RDF lockstep operation but you have not configured
RDF for lockstep operations.
Effect No lockstep operations can take place, and the lockstep gateway process abends.
Recovery This is a warning. If you want lockstep operations, you must stop RDF and create
a new RDF configuration with the RDF LOCKSTEPVOL attribute set.
873
Remote RDF purger started
Cause The purger has started as the result of a START RDF command.
Effect The purger commences normal processing.
Recovery This is an informational message; no recovery is required.
874
SEGMENT_ALLOCATE_ returned error error, error-detail#
error
is an error number.
error-detail#
is the detailed error number.
Cause The specified error occurred while attempting to allocate an extended segment.
Effect The affected process abends and RDF will abort.
Recovery Try to determine why the segment could not be allocated. Take appropriate
corrective action and restart RDF.
875
Incompatible file format filenameformatfileformat, audit auditformat
filename
is the filename.
fileformat
specifies the format of the file.
auditformat
specifies the format of the audit trail.
Cause The updater process has detected that the file format and the audit format do not
agree. The event shows the file format and the audit format.
Effect The process abends and RDF will abort.
Recovery The file must be altered or recreated with the correct file format and then RDF
can be restarted.
876
Imagetrail safe position: SNO sno RBA rba
sno
is the sequence number.
rba
is the relative byte address.
Cause This is an imagetrail safe position.
Effect This is an internal event. There is no effect.
Recovery This is an informational message for historical purposes about a pending undo
pass. No recovery action is required.
378 Messages