RDF System Management Manual for H-Series RVUs (RDF 1.8)

Cause The configuration file data cannot be created or cleared while START RDF processing
is performed after INITIALIZE RDF.
Effect START RDF processing is aborted.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the command that encountered
the error. Otherwise, see your system manager.
Couldn't create or clear the PRIMARYSYSTEM CONTEXT (error#)
error#
is the file-system error number that identifies the specific error.
Cause The context file data cannot be created or cleared while START RDF processing is
performed after INITIALIZE RDF.
Effect START RDF processing is aborted.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the command that encountered
the error. Otherwise, see your system manager.
Couldn't OPEN the started process: error#
error#
is the error number that identifies the specific error.
Cause An open error occurred during START RDF or STOP RDF command processing.
Effect The START RDF or STOP RDF operation is aborted.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting process errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the command that encountered
the error. Otherwise, see your system manager.
Couldn't WRITE startup to the started process error#
error#
is the error number that identifies the specific error.
Cause A write error occurred during START RDF or STOP RDF command processing.
Effect The operation is aborted.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting process errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the command that encountered
the error. Otherwise, see your system manager.
cpu:cpu CPUS are NOT available
cpu:cpu
are the primary and backup CPUs, respectively.
Cause Both the configured primary and backup CPUs were unavailable when a START
RDF command was issued.
Effect The command fails.
Recovery Wait until both CPUs become available, and reenter the START RDF command.
If necessary, see your system manager.
cpu:cpu CPUS are not SYSGEN’d
cpu:cpu
are the primary and backup CPUs, respectively.
RDFCOM Messages 393