RDF System Management Manual for H-Series RVUs (RDF 1.8)

EXTRACTOR record NOT found
Cause The INFO command could not find an extractor record in the configuration file.
Effect The command fails.
Recovery Alter the configuration to include an extractor process.
Fixing up context to enable another RDFCOM Takeover command
Cause The COPYAUDIT command has finished copying the missing audit from the remote
system to the local system, and is now about to update context records to permit execution of
another TAKEOVER command.
Effect RDF begins to update the context records.
Recovery This is an informational message; no recovery is required.
Fixing up the ZFILEINC file to enable another RDFCOM Takeover command
Cause The COPYAUDIT command has finished copying the missing audit from the remote
system to the local system, and is now about to copy the ZFILEINC file from the remote system
to the local system.
Effect RDF begins to copy the ZFILEINC file.
Recovery This is an informational message; no recovery is required.
Global record not found for subsystem ctrl-subvol
ctrl-subvol
is the name of an RDF subsystem control subvolume.
Cause The global record of the RDF subsystem with the specified control subvolume could
not be found.
Effect Validation fails.
Recovery Before you can validate your local RDF subsystem, you must configure all RDF
subsystems in your network.
Illegal File Format: error#
error#
is the NEWPROCESS error number that identifies the specific error.
Cause A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect The START RDF or TAKEOVER operation is aborted.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting process errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the command that encountered
the error. Otherwise, see your system manager.
Illegal Home Terminal: error#
error#
is the NEWPROCESS error number that identifies the specific error.
Cause A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect The START RDF or TAKEOVER operation is aborted.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting process errors, see the Guardian Procedure Errors
and Messages Manual. Correct the error and reenter the START RDF or TAKEOVER command.
Image files needed for Triple Contingency must have been purged because
the receiver’s retaincount must have been set too low.
Cause Audit required for the COPYAUDIT command on the remote system has been purged,
probably because the receiver’s RETAINCOUNT value was set too low.
400 Messages