RDF System Management Manual for H-Series RVUs (RDF 1.8)

Cause The RDF configuration file is invalid.
Effect The configuration validation fails.
Recovery Check the receiver parameter entries in the configuration file for invalid values
and correct any errors found.
No VOLUMEs are configured
Cause The RDF configuration file is invalid.
Effect The configuration validation fails.
Recovery Check the updater process parameters in the configuration file for invalid values
and correct any errors found.
No VOLUMES are configured for ATINDEX atindex
Cause You added an extractor and receiver with the specified ATINDEX, but there are no
updaters with that value.
Effect The validation fails.
Recovery Add at least one updater with the same ATINDEX value or delete the particular
extractor-receiver pair.
Obtained error error# in attempting to examine remote imagetrail files
error#
is the file-system error number that identifies the specific error.
Cause The COPYAUDIT command encountered the specified error in attempting to read
the remote image trail files.
Effect The command fails.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, see your system manager.
Only one Network record is allowed for a non-network master
Cause Your current RDF configuration does not have the NetworkMaster attribute set and
you have tried to add more than one network record.
Effect The configuration command fails.
Recovery If the network record you have previously added pertains to the RDF network
master subsystem, then do not add any further network records. If the network record you
have previously added does not pertains to the RDF network master subsystem, then you
need to purge your current configuration, reinitialize, and reconfigure.
Only the SUPER group can execute this command
Cause You issued a command restricted to members of the super-user group, but your
logon ID does not indicate that group.
Effect The command fails.
Recovery Select another command, or ask an authorized person in the super-user group to
issue the command for you.
Open error error# on filename
error#
is the file-system error number that identifies the specific error.
filename
is the name of the TMF Master Audit Trail (MAT).
Cause An open error occurred on the TMF Master Audit Trail (MAT).
Effect The file is not opened.
408 Messages