RDF System Management Manual for H-Series RVUs (RDF 1.8)

filename
is the name of the image trail file associated with the error.
Cause The COPYAUDIT command encountered the specified error while attempting to
position into the specified image file on the local image trail volume.
Effect The COPYAUDIT command aborts.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Position error error# on remote image file
error#
is the file-system error number that identifies the specific error.
Cause The COPYAUDIT command encountered the specified error while attempting to
position into a remote image file on the remote image trail.
Effect The COPYAUDIT command aborts.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting file-system errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Primary node in network master record is incorrect primary-system
primary-system
is an RDF system name.
Cause The network master network record does not have the specified primary system
name.
Effect Validation fails.
Recovery You must reconfigure your network master.
PRIMARYSYSTEM (\node) and BACKUPSYSTEM (\node) are the same
node
is the name assigned to both the primary and backup nodes.
Cause The RDF configuration file is invalid: both primary and backup node names are
identical.
Effect The validation fails.
Recovery Alter the RDF configuration to reflect different names for these two nodes.
Process Name Error: error#
error#
is the error number that identifies the specific error.
Cause A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect The START RDF or TAKEOVER operation is aborted.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting process errors, see the Guardian Procedure Errors
and Messages Manual. If possible, correct the error and reenter the command that encountered
the error. Otherwise, contact your service provider.
Program and Library File are the Same
Cause A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect The START RDF or TAKEOVER operation is aborted.
Recovery Change the library filename.
RDFCOM Messages 411