RDF System Management Manual for H-Series RVUs (RDF 1.8)

Cause The COPYAUDIT command is about to search for missing audit; this audit reached
the specified image trail on the remote system but did not reach the local system before the
original primary system was lost.
Effect The COPYAUDIT command begins the search.
Recovery This is an informational message; no recovery is required.
Shutdown at specified timestamp timestamp does not exist
timestamp
is the shutdown timestamp to which the initialization was requested.
Cause You entered an INITIALIZE RDF timestamp command, but RDFCOM found an
audit timestamp earlier than the one you specified in the command. This indicates that a TMF
shutdown at the specified timestamp does not exist.
Effect RDF is not initialized.
Recovery Examine the EMS log or the OPRLOG for a TMF shutdown message, and use the
corresponding timestamp.
SHUTDOWN Failure: error# on RECEIVER
error#
is the error number that identifies the specific error.
Cause RDFCOM could not stop the receiver because of error#.
Effect The shutdown operation is aborted.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting errors, see the Guardian Procedure Errors and Messages
Manual. If possible, correct the error and reenter the command that encountered the error.
Otherwise, see your system manager.
SHUTDOWN Failure: error# on VOLUME volume
error#
is the error number that identifies the specific error.
volume
is the name of an RDF data volume.
Cause RDFCOM could not stop the updater for volume volume because of error.
Effect The shutdown is aborted.
Recovery See the Operator Messages Manual for a description of the error code. For additional
details about understanding and correcting errors, see the Guardian Procedure Errors and Messages
Manual. If possible, correct the error and reenter the command that encountered the error.
Otherwise, see your system manager.
Specified network backup system name is not defined.
Cause The specified backup system does not exist.
Effect The configuration command fails.
Recovery You must specify a valid backup system name.
Specified network backup system name is unavailable.
Cause RDFCOM is unable to reach the specified backup system.
Effect The configuration command fails.
Recovery Determine why the communications path to this system is down and take the
appropriate recovery steps to bring it back up.
Specified network primary system name is not defined.
Cause The specified primary system does not exist.
Effect The configuration command fails.
418 Messages