RDF System Management Manual for H-Series RVUs (RDF 1.8)

Recovery Enter another command, or wait until RDF is started and then reenter the STATUS
RDF command.
STOP SYNCH command is aborted.
Cause You are attempting to execute the RDFCOM STOP SYNCH command, but either the
RDF product is not running or another critical operation is already in progress.
Effect The RDFCOM STOP SYNCH command aborts.
Recovery Correct the situation and then reissue the command.
STOP SYNCH command is aborted because database synchronization is not
in progress.
Cause You are attempting to execute an RDFCOM STOP SYNCH command, but online
database synchronization is not in progress.
Effect The RDFCOM STOP SYNCH command aborts.
Recovery You can only execute the STOP SYNCH command if the RDF product is currently
involved in online database synchronization. Because the RDF product is not involved in a
database synchronization, this is an informational message; no recovery is required.
STOP UPDATE in progress, Please Wait...
Cause A STOP UPDATE command is being executed.
Effect The stop operation continues for the updater process.
Recovery This is an informational message; no recovery is required.
STOP UPDATE request could not be completed
Cause You entered a STOP UPDATE command, but the monitor could not send stop
messages to all updater processes and has logged RDF error 841 to the EMS event log.
Effect Some updaters might have shut down, but others never received the stop message
and are still running. The receiver and monitor cannot now identify these updaters, and you
cannot stop them with another STOP UPDATE command or a STOP RDF command.
Recovery All remaining updaters must be manually stopped from the TACL interface (for
example, with a TACL STOP $UPD1 command). Examine the EMS event log for the error
message 841; this message contains the Guardian error number that the monitor received when
attempting to stop the updater.
Storing missing audit in the imagetrail.
Cause The COPYAUDIT command has located the missing audit for the image trail identified
in the previous message and is ready to move that audit from the remote system to the local
system.
Effect The COPYAUDIT command moves the audit to the local system.
Recovery This is an informational message; no recovery is required.
SUFFIX must be a single alphaumeric character
Cause You specified an incorrect value for the SUFFIX option of the INITIALIZE RDF
command.
Effect The INITIALIZE RDF command is aborted.
Recovery Reenter the command, specifying a single alphanumeric character for the suffix
character.
Swap File Error: error#
error#
is the file-system error number that identifies the specific error.
Cause A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect The command fails.
420 Messages