RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Table 10 Recovery From File Modification Failures (RDF Event 700) (continued)
Recovery ActionFile System Error
Repair the device or clear the condition.190
Repair the device or clear the condition.200 through 231
Enable the volume for TMF transaction processing.707
Table 11 lists the file-system error numbers and recovery actions for RDF event 705, which reports
file-opening failures.
Table 11 Recovery From File Open Failures (RDF Event 705)
Recovery ActionFile System Error
Resynchronize the file. The updater process skips the open operation.11
Issue a FUP LISTOPENS command for the file and stop applications that have the file open.12
Repair the device or clear the condition.14
If the problem persists, alter the hardware configuration or perform system tuning.30 through 37
Alter the security (probably Safeguard).48
Repair the device or clear the condition.50 through 58
Check file integrity.59
Repair the device or clear the condition.60 through 66
Repair the device or clear the condition.100
Repair the device or clear the condition.103
Repair the device or clear the condition.120 through 121
Repair the device or clear the condition.130 through 139
Check file integrity.157
Repair the device or clear the condition.190
Alter the security (probably Safeguard).199
Repair the device or clear the condition.200 through 231
Table 12 lists the file-system error numbers and recovery actions for RDF event 739, which reports
file-creation failures.
Table 12 Recovery From File Creation Failures (RDF Event 739)
Recovery ActionFile System Error
The file already exists. Purge the old one.10
Repair the device or clear the condition.14
If the problem persists, alter the hardware configuration or perform system tuning.30 through 37
Provide more room for the file or extent by using FUP commands, such as PURGE and ALTER
MAXEXTENTS, or by compressing files. You might need to issue a STOP UPDATE command.
43 through 45
Alter the security (probably Safeguard). If an updater fails to create a data file on a backup
volume because of a security violation, it logs this error and restarts with this file-creation
image until you change the security.
48
Repair the device or clear the condition.50 through 58
Check file integrity.59
Recovering From File System Errors 115