RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

{RDF }
{MONITOR }
{EXTRACTOR }
{RECEIVER }
{RDFNET }
{NETWORK }
{PURGER }
{TRIGGER trigger-type }
{VOLUME * }
{[VOLUME] $volume }
*
displays the current configuration parameter values for the RDF global options, for all updater
volumes, and for all RDF processes.
[ATINDEX audittrail-index-num]
is an integer value from 0 through 15 identifying the TMF audit trail on the primary system
with which the particular RDF object is associated. 0 specifies the MAT. 1 through 15 specify
auxiliary audit trails AUX01 through AUX15, respectively.
You can use this option only with the EXTRACTOR, IMAGETRAIL, RECEIVER, and [VOLUME]
$volume variations of the INFO command.
For INFO EXTRACTOR, INFO IMAGETRAIL, and INFO RECEIVER commands, the default is 0.
If you omit this parameter, RDFCOM assumes you want to display information about the
designated object associated with the MAT.
For INFO VOLUME commands, this parameter is optional regardless of whether the updater
is associated with MAT or an auxiliary audit trail.
OBEYFORM
formats the INFO command output as command file text that can be executed by RDFCOM.
Before issuing the INFO command, you can designate the command file for this text by
specifying the file name in either:
• The OUT option of the RDFCOM command that begins your interactive session
• An OUT command issued during the session
If you do not specify a command file for the text, TACL supplies the name of its current default
output destination—usually the terminal from which you began your session.
The subsystem saves the text in the command file, also embedding the appropriate SET and
ADD commands. Any time you want, you can execute the text by specifying the command file
name in an OBEY command or in the IN option of the RDFCOM command that begins a
session, producing a new RDF configuration based on the one captured by the INFO command.
You can use the OBEYFORM option with any variation of the INFO command: for example,
with INFO EXTRACTOR, INFO RDF, or INFO *.
IMAGETRAIL
displays the names of all volumes on the backup system that are configured as secondary
image trail volumes.
RDF
displays the current configuration parameter values for the RDF global options.
MONITOR
displays the current configuration parameter values for the monitor process.
EXTRACTOR
displays the current configuration parameter values for the extractor process.
RECEIVER
displays the current configuration parameter values for the receiver process.
RDFCOM Commands 195