RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

VOLUME PRIORITY 160
VOLUME PROCESS $UP03
VOLUME UPDATEVOLUME $DATA3
INFO PURGER Command
To display the current configuration parameters for the purger process, enter the following command:
]INFO PURGER
The output shows that the purger is configured with the following parameter values: running in
CPUs 3 and 2, with a priority of 165, a retaincount of 50, a purgetime of 60, and the
process name $PURG:
PURGER CPUS 3:2
PURGER PRIORITY 165
PURGER PROCESS $PURG
PURGER RETAINCOUNT 50
PURGER PURGETIME 60
INFO TRIGGER Command
To display the configuration parameters for any currently-configured triggers, enter the following
command:
]INFO TRIGGER *
The following output shows that both a reverse trigger and a takeover trigger are configured with
the designated parameter values:
TRIGGER PROGRAM $SYSTEM.RDF.RDFCOM
TRIGGER INFILE $DATA01.RDF.REVTRIG
TRIGGER OUTFILE $DATA01.RDF.OUTFILE
TRIGGER CPUS 0:1
TRIGGER PRIORITY 150
TRIGGER NOWAIT
TRIGGER REVERSE
TRIGGER PROGRAM $SYSTEM.SYSTEM.TACL
TRIGGER INFILE $DATA01.RDF.TKOVER
TRIGGER OUTFILE $DATA01.RDF.OUTFILE
TRIGGER CPUS 0:1
TRIGGER PRIORITY 150
TRIGGER NOWAIT
TRIGGER TAKEOVER
INFO TRIGGER Command With OBEYFORM Option
Like all INFO commands, INFO TRIGGER supports the optional OBEYFORM parameter. The output
of an INFO TRIGGER REVERSE, OBEYFORM command might be:
SET TRIGGER PROGRAM $SYSTEM.RDF.RDFCOM
SET TRIGGER INFILE $DATA01.RDF.RDFCONF
SET TRIGGER OUTFILE $DATA01.RDF.OUTFILE
SET TRIGGER CPUS 0:1
SET TRIGGER PRIORITY 150
SET TRIGGER NOWAIT
ADD TRIGGER REVERSE
INFO RDFNET Command
To display the current configuration parameters for the RDFNET process, enter the following
command:
]INFO RDFNET
RDF displays the following:
RDFNET PROCESS $MNET
RDFNET CPUS 0:1
RDFNET PRIORITY 180
200 Entering RDFCOM Commands