RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

• The volumes for the image files (specified by the RDFVOLUME option of a SET RECEIVER
command and any ADD IMAGETRAIL commands) are valid and exist on the backup system.
• The volumes for the image files have enough room for two more image files (for an RDF restart).
• The primary volumes associated with the updater processes are valid and are being audited
to the TMF audit trail.
• The backup volume associated with each updater process (specified by the UPDATEVOLUME
option of the SET VOLUME command) exists on the backup system.
• Mapping strings specified in the mapfiles of all the updaters are valid.
• If reports need to be generated, the following checks are performed:
The primary and backup processors of the configured processes are functional and
available for use.
◦
◦ The RDF/IMPX license is installed.
◦ The SQL/MX version supported by RDF is installed on the backup system.
If RDFCOM detects any configuration errors, it displays an appropriate message.
Example
To validate the RDF configuration, enter:
]VALIDATE CONFIGURATION
If the current content of the RDF configuration file is valid, RDFCOM displays this message:
Configuration Validated
If any of the parameters in the RDF configuration file are not valid, RDFCOM displays a message
such as:
BACKUPSYSTEM (\TORONTO) is not available
RECEIVER RDFVOLUME $TRAIN does not exist
]VALIDATE CONFIGURATION,REPORT
If the current content of the RDF configuration file is valid, RDFCOM displays this message:
Configuration Validated
The report is generated on the screen as shown below:
---------------------------------------------------------------------------------
RDF CONFIGURATION VALIDATION REPORT
Date:2010/11/19 Time:13:12:46
--------------------------------------------------------------------------------
TMF Initialization Validation:
-------------------------------
TMF Initialization Check.....................Passed
RDF Configuration Validation:
------------------------------
Monitor Configuration Record.................Present
Extractor Configuration Record...............Present
Receiver Configuration Record................Present
Purger Configuration Record..................Present
Volume Configuration.........................Present
Updater Configuration Record(1)..............Present
Updater Configuration Record(2)..............Present
License and CPU UP Validation:
-------------------------------
Monitor - N:$MR01 PF:\TESTSYS1.$SYSTEM.DEVRDF.RDFMONO CPU# 1:0
Program File License Check.........Passed
CPU UP Check.......................Both CPUs Up
Extractor - N:$MR02 PF:\TESTSYS1.$SYSTEM.DEVRDF.RDFEXTO CPU# 1:0
Program File License Check.........Passed
248 Entering RDFCOM Commands