RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

SET RDF SOFTWARELOC $SYSTEM.RDF
SET RDF LOGFILE $0
SET RDF UPDATERDELAY 10
SET RDF UPDATERTXTIME 60
SET RDF UPDATERRTDWARNING 60
SET RDF UPDATEROPEN PROTECTED
SET RDF NETWORK ON
SET RDF NETWORKMASTER OFF
SET RDF UPDATEREXCEPTION OFF
ADD RDF
SET MONITOR CPUS 1:2
SET MONITOR 185
SET MONITOR PROCESS $MMON
ADD MONITOR
SET EXTRACTOR ATINDEX 0
SET EXTRACTOR CPUS 1:2
SET EXTRACTOR PRIORITY 185
SET EXTRACTOR PROCESS $MEX1
SET EXTRACTOR RTDWARNING 60
ADD EXTRACTOR
SET RECEIVER ATINDEX 0
SET RECEIVER CPUS 3:2
SET RECEIVER EXTENTS (100,100)
SET RECEIVER PRIORITY 185
SET RECEIVER RDFVOLUME $DATA11
SET RECEIVER FASTUPDATEMODE OFF
SET RECEIVER PROCESS $MR51
ADD RECEIVER
SET PURGER CPUS 3:2
SET PURGER PRIORITY 185
SET PURGER PROCESS $RP50
SET PURGER RETAINCOUNT 5
SET PURGER PURGETIME 60
ADD PURGER
SET IMAGETRAIL ATINDEX 0
ADD IMAGETRAIL $DATA06
SET NETWORK PRIMARYSYSTEM \RDF04
SET NETWORK BACKUPSYSTEM \RDF06
SET NETWORK REMOTECONTROLSUBVOLUME RDF04
ADD NETWORK
SET VOLUME ATINDEX 0
SET VOLUME CPUS 1:2
SET VOLUME IMAGEVOLUME $DATA06
SET VOLUME PRIORITY 185
SET VOLUME PROCESS $RU53
SET VOLUME UPDATEVOLUME $DATA08
ADD VOLUME $DATA08
RESET VOLUME
RDFCOM STATUS Display
This example illustrates the RDFCOM STATUS display for a network master it includes the RDFNET
process).
RDFCOM - T0346H09 – 11AUG08
(C)2008 Hewlett-Packard Development Company, L.P.
Status of \RDF04 -> \RDF05 RDF 2008/08/11 05:26:49.082
290 Network Transactions