RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

SET RDFNET
The SET RDFNET command sets the designated configuration parameters for the RDFNET process
to the supplied values within the RDF configuration memory table. The supplied values are not
applied to the RDF configuration file, however, until you issue an ADD command.
Where Issued: Primary system only.
Security: Super-user group member.
SET RDFNET netsync-option
where netsync-option is:
{CPUS primary-CPU : backup-CPU}
{PRIORITY priority-number }
{PROCESS process-name }
SET RECEIVER
The SET RECEIVER command sets the designated configuration parameters for the receiver process
to the supplied values within the RDF configuration memory table. The supplied values are not
applied to the RDF configuration file, however, until you issue an ADD command.
Where Issued: Primary system only.
Security: Super-user group member.
SET RECEIVER receiver-option
where receiver-option is:
{ATINDEX atindex }
{CPUS primary-CPU : backup-CPU }
{EXTENTS (primary-extent-size,secondary-extent-size)}
{PRIORITY priority-number }
{PROCESS process-name }
{RDFVOLUME volume }
{FASTUPDATEMODE on-off value }
SET TRIGGER
The SET TRIGGER command sets trigger parameters within the RDF configuration memory table.
The supplied values are not applied to the RDF configuration file, however, until you issue an ADD
TRIGGER command. The trigger type (REVERSE or TAKEOVER) is specified in the ADD TRIGGER
command.
Where Issued: Primary system; backup system when the primary is not available.
Security: Super-user group member.
SET TRIGGER trigger-option
where trigger-option is:
{PROGRAM program-file }
{INFILE infile }
{OUTFILE outfile }
{CPUS primary-CPU : backup-CPU }
{PRIORITY priority }
{WAIT | NOWAIT }
SET VOLUME
The SET VOLUME command sets the designated configuration parameters for an updater process
to the supplied values within the RDF configuration memory table. The supplied values are not
applied to the RDF configuration file, however, until you issue an ADD command.
Where Issued: Primary system only.
Security: Super-user group member.
SET VOLUME volume-option
RDFCOM Commands Quick Reference 335