RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

filename
is the Guardian file name of the file that encountered the error.
Cause
The updater was previously delayed in obtaining information about the specified object. See
RDF error 736. The information has now been obtained.
Effect
The updater continues processing.
Recovery
This is an informational message; no recovery is required.
745
Audit record conversion error error
error
is the error number.
Cause
The extractor encountered the specified error while attempting to convert an audit record from
one version to another.
Effect
The extractor abends, thereby stopping the other RDF processes.
Recovery
This is an internal error. Contact your service provider.
746
Error during program initialization
Cause
A fatal error occurred during RDF subsystem initialization.
Effect
RDF stops. Error 743 should follow this message.
Recovery
Check the EMS event log for any preceding errors that might indicate the source of the problem.
If it is possible to correct the underlying problem, then RDF can be restarted.
747
Volume must be a TMF datavol volume
volume
is the name of the volume on the remote node that must be added to the TMF configuration
as a data volume.
Cause
Either TMF has not been started on the remote node, or the volume associated with this updater
on the remote node has not been added as a datavol in the TMF configuration. TMF must be
started on the remote node, and the volume associated with this updater on the remote node
must be added as a datavol to this remote TMF configuration.
Effect
The updater will not start.
Recovery
Start TMF on the remote system and add the associated volume as a datavol in the TMF
configuration. Additionally, you should start the volume for transaction processing.
RDF Messages 361