RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Effect
The extractor continues with processing the second part of phase one.
Recovery
This is an informational message; no recovery is required.
767
Phase one part 2 database synchronization complete
Cause
The second part of phase one of a database synchronization operation has completed.
Effect
The extractor continues with the third part of phase one.
Recovery
This is an informational message; no recovery is required.
768
Phase one part 3 database synchronization complete
Cause
The third part of phase one of a database synchronization operation has completed.
Effect
The extractor continues with phase two.
Recovery
This is an informational message; no recovery is required.
769
Rolling over to filename
filename
is the name of the next image file in the sequence.
Cause
The reporting process has filled the current image file and is ready to begin writing to the next
file in the sequence. This next file is named in filename .
Effect
The reporting process rolls over into the specified image file.
Recovery
This is an informational message; no recovery is required.
770
RDF RDFNET process started
Cause
The RDFNET process has successfully completed its initialization.
Effect
The process starts its task of performing synchronized transactions on each of the primary nodes
in the RDF network of RDF primary systems.
Recovery
This is an informational message; no recovery is required.
771
Remote RDF receiver started
RDF Messages 367