RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Effect
The primary process will now run in fault-tolerant mode.
Recovery
This is an informational message; no recovery is required.
796
Image file creation error error on filename
error
is the file-system error number that identifies the specific error.
filename
is the name of the image file associated with the error.
Cause
The receiver or purger process could not create the specified file due to the specified file-system
error.
Effect
This is a catastrophic error; the process abends and RDF stops.
Recovery
Correct the underlying condition, then restart RDF.
797
Warning - Image file purge error error# on filename [File is currently
opened by proc-id, program-filename]
error
is the file-system error number that identifies the specific error.
filename
is the name of the image file associated with the error.
proc-id
is the process ID of the opener process.
program-filename
is the program filename of the opener process.
Cause
The purger process could not purge an image file that is no longer needed. The message includes
the file-system error number and the name of the image file. If the image file is in use by another
process, its process name or process ID is reported together with the program filename of the
process that has the image file open.
Effect
This is only a warning.
The process will retry the purge operation.
Recovery
Correct the underlying condition, and then the process will purge the image file at the next
opportunity.
NOTE: Under some circumstances, after the configured backup receiver process re-creates its
primary process and switches to that process, it continues to hold an image file open. When the
receiver no longer needs this image file and the purger tries to purge it, the purger logs RDF
error 797 accompanied by file-system error 12. If the backup receiver process is the opener,
you can manually stop the backup receiver process with the TACL STOP command; this clears
the problem so that the next time the receiver stops or finishes with an image file, this file will
be purged.
RDF Messages 373