RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Effect
The message includes the error number returned by the WRITE system procedure followed by
the file name.
For error 43 (unable to obtain disk space for extent), the receiver retries the write operation. All
other errors are fatal; the receiver abends, and RDF stops.
Recovery
The only recovery from an error 43 condition is to free some disk space. You can do that by
purging unused files, by using FUP DEALLOCATE to deallocate unused extents (not for image
files), or by using DCOM to move extents so that small free areas are combined into a larger
free space.
801
Internal error code
code
is an internal error code that provides further information about the error.
Cause
An RDF process has detected an internal inconsistency.
Effect
This error should never occur and is fatal to RDF.
Recovery
Restart RDF. If the problem persists, then you will need to reinitialize RDF and report the error
to your service provider.
802
Image trail file has bad RDF header record filename
filename
is the name of the image file associated with the error.
Cause
An RDF process has encountered a bad header in an image file.
Effect
A bad header indicates that the image file has been corrupted.
This is a catastrophic error; the process abends, and RDF stops.
Recovery
Restart RDF. If the problem persists, then you will need to reinitialize RDF and report the error
to your service provider.
803
Position error error on filename
error
is the file-system error number that identifies the specific error.
filename
is the name of the affected file.
Cause
The RDFNET process has encountered the specified error on the specified file.
Effect
The RDFNET process aborts its current transaction, posts a timer, and waits for that timer to
expire before attempting a new transaction.
RDF Messages 375