RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Recovery
This is an informational message; no recovery is required.
808
Update mode has been set OFF
Cause
The operator issued a STOP UPDATE command.
Effect
RDF stops updating the backup database.
Recovery
This is an informational message; no recovery is required.
809
Shutting down in response to STOP RDF
Cause
The operator issued a STOP RDF command.
Effect
The RDF process stops normally.
Recovery
This is an informational message; no recovery is required.
810
Shutting down in response to STOP TMF, timestamp timestamp
timestamp
is the time of the shutdown.
Cause
The operator issued a TMFCOM STOP TMF command at the primary node. timestamp is the
time of that shutdown.
Effect
The RDF process stops normally.
Recovery
This is an informational message; no recovery is required.
811
RDF TAKEOVER initiated
Cause
The operator issued a TAKEOVER command.
Effect
RDF starts a TAKEOVER operation.
Recovery
This is an informational message; no recovery is required.
812
Error error communicating with procname
error
is the file-system error number that identifies the specific error.
procname
is the name of the process with which the updater cannot communicate.
RDF Messages 377