RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

transaction marked for undo on a different node in the RDF network. Note, however, that this
transaction could still be undone during final checking for business consistency across all backup
nodes.
Effect
This is an internal event. There is no effect.
Recovery
This is an informational message; no recovery is required.
824
Missing RDF extractor config record, ATINDEX audit-trail-index
Cause
The RDF monitor was unable to find an extractor configuration record when performing a START
RDF command. The ATINDEX value in the message indicates the audit trail index for the extractor.
Effect
The START operation fails and RDF shuts down.
Recovery
Use the SET and ADD commands to create an extractor configuration record and then retry the
START RDF command.
825
Missing RDF receiver config record, ATINDEX audit-trail-index
Cause
The RDF monitor was unable to find a receiver configuration record when executing a START
RDF command. The ATINDEX value in the message indicates the audit trail index for the receiver.
Effect
The START operation fails and RDF shuts down.
Recovery
Use the SET and ADD commands to create a receiver configuration record and then retry the
START RDF command.
826
Missing RDF updater CONFIG record
Cause
The RDF monitor was unable to find an updater configuration record when performing a START
RDF command.
Effect
The START operation fails and RDF shuts down.
Recovery
Use the SET and ADD commands to create one or more updater configuration records.
827
RDF version incompatible with TMF
Cause
The RDF process is not compatible with the audit format being generated by TMF.
Effect
RDF stops.
Recovery
Restart RDF under the correct version of the operating system and/or TMF.
RDF Messages 381