RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Cause
TMF was stopped during an RDF online database synchronization operation, before the extractor
had completed its phase one processing.
Effect
The extractor abends because the database synchronization operation can no longer succeed.
Recovery
You must reinitialize the RDF product and restart the online database synchronization operation.
850
TMF Shutdown during phase one of database synchronization
Cause
TMF was stopped during an RDF online database synchronization operation, after the extractor
had completed its phase one, part 1 processing.
Effect
The extractor completes phases one and two of its database synchronization processing and
then shuts down in response to the TMF shutdown audit record.
Recovery
This is an informational message; no recovery is required. When you restart the RDF product,
ensure that the duplicate database tables and files have been moved to the backup system before
you start the updaters.
851
Too many nodes in network transactions
Cause
The RDF product cannot support an environment where transactions involving the RDF primary
system have originated on more than 255 different nodes. The receiver has encountered
transactions that have originated on more than 255 nodes.
Effect
The receiver abends and the RDF system aborts.
Recovery
Recovery is not possible. Contact your service provider.
852
STOP RDF, DRAIN completed. All updaters have stopped
Cause
A STOP RDF, DRAIN command has completed successfully.
Effect
This RDF environment shuts down.
Recovery
This is an informational message; no recovery is required.
853
Purger TST filled
Cause
In determining what transactions need to be undone, the internal table of transactions has become
filled.
Effect
RDF aborts.
388 Messages