RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Cause
The extractor has fallen behind the configured RTDWARNING threshold specified in the RDF
configuration.
Effect
The extractor continues normal processing.
Recovery
This is an informational message. You should, however, try to determine why the extractor has
fallen behind and take corrective action if necessary.
862
Updater processname RTD (rtd) exceeds RTD warning threshold (threshold#)
processname
is an updater process name.
rtd
is an RTD value.
threshold#
is an RTDWARNING warning threshold value.
Cause
The specified updater has fallen behind the configured updater RTDWARNING threshold.
Effect
The updater continues normal processing.
Recovery
This is an informational message. You should, however, try to determine why the updater has
fallen behind and take corrective action, if necessary.
863
Missing RDFNET CONFIG record
Cause
The RDF monitor process was unable to find the RDFNET configuration record when performing
a START RDF command.
Effect
The START RDF operation fails and RDF shuts down.
Recovery
Restart RDF. If the record is still missing, then you might have to reinitialize RDF.
864
SQL Shared Access DDL record found during undo pass
Cause
The updater has encountered audit associated with an SQL Shared Access DDL operation during
undo processing for a stop-update-to-time operation.
Effect
The updater terminates immediately, and the stop-update-to-time operation is unsuccessful. This
situation happened because you had a transaction on your primary system that started before
your SQL Shared Access DDL operation and was still active after it.
Recovery
Restart the updaters. If you need to bring the backup database into a stable state, you will have
to issue a later time that is later than your previous time.
RDF Messages 391