RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

887
Process trapped. Signal sig-num
sig-num
is the signal number associated with the trap.
Cause
The process reporting the event experienced an internal error and has trapped. The message
indicates the signal number associated with the trap.
Effect
The process abends.
Recovery
This is an internal error. Preserve the saveabend file created and report the incident to your
service provider.
888
MAT position for File Recovery: SNO num RBA num
Cause
A successful takeover has completed. If you need to bring your primary database back into
synchronization with your backup database, use TMF File Recovery on your primary system with
the specified MAT position.
Effect
None.
Recovery
This is an informational message. See the TMF Manual for information about TMF File Recovery
to an audit trail position (TOMATPOSITION).
889
Purger restarting on attempt to build network undo list
Cause
The purger has been attempting to build the network undo list, but it has either encountered a
network error or it has been waiting too long for information it needs.
Effect
The purger begins another attempt to build the list.
Recovery
This is an informational message. You should examine the event log to see if the purger has
reported a network error and take corrective action if required. If no errors have been reported,
then the purger is waiting for another purger in the RDF network to complete work. If this is the
case, you have no recovery action. The local purger will retry until the remote purger has
completed the required work.
890
Purger attempting to build network undo list
Cause
The purger is ready to try to build the network undo list. This event indicates that this is the
purger's first attempt or it is about to retry the operation because of a previous failure.
Effect
The purger starts an attempt to build the list.
Recovery
This is an informational message; no recovery is required.
RDF Messages 397