RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Cause
The purger logs this event whenever all updaters have stopped following a STOP UPDATE
command.
Effect
The updater processes are stopped.
Recovery
This is an informational message; no recovery is required.
911
Updaters stopped before STOP RDF, DRAIN has completed
Cause
The purger has detected that all the updaters have stopped, but at least one updater stopped
prematurely and did not drain all audit.
Effect
The STOP RDF, DRAIN is not complete.
Recovery
Restart RDF and issue a new STOP RDF, DRAIN command.
912
Starting trigger-type trigger using object-file
trigger-type
is the trigger type, REVERSE or TAKEOVER.
object-file
is the name of the Guardian object file to be executed.
Cause
The purger is about to start the user-configured trigger process.
Effect
The trigger process is started.
Recovery
This is an informational message; no recovery is required.
914
Trigger process completed. [ Completion Code: num ] [ Termination Text:
text ] [ The process is abended. ]
num
is the completion code.
text
is the termination text.
Cause
The purger has seen that the user specified trigger process has stopped. The message might
include completion code and/or termination text information that indicates why the process
stopped. If the process abended that will also be indicated.
Effect
The trigger process is stopped.
Recovery
There is no set recovery procedure. See the Guardian Procedure Errors and Messages Manual
for a description of completion codes.
RDF Messages 403