RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Recovery
To determine which updaters terminated prematurely, examine the EMS event log for error
number 726. Then, reissue the TAKEOVER command.
A required attribute for network master is missing
Cause
You must specify the PrimarySystem, BackupSystem, RemoteControlSubvolume, and PnetTxVolume
attributes for each Network record in the configuration of your network master, but you are
missing one or more or more of these network attributes.
Effect
The configuration command fails.
Recovery
Set the missing fields and add the record.
A required attribute for a non network master is missing
Cause
You must specify the PrimarySystem, BackupSystem, and RemoteControlSubvolume for the network
master of your RDF network.
Effect
The configuration command fails.
Recovery
Set the missing fields and add the record.
A TAKEOVER operation has not completed on the local system
Cause
You tried to execute the COPYAUDIT command, but the RDF TAKEOVER operation has not
completed on the local system.
Effect
The COPYAUDIT command is aborted.
Recovery
You must execute the RDF TAKEOVER operation on both backup systems before you can use
the COPYAUDIT command of the triple contingency protocol.
An RDF TAKEOVER has completed
Cause
The operator issued a TAKEOVER command at the backup node and the TAKEOVER operation
has completed.
Effect
The backup database becomes the database of record.
Recovery
This is an informational message; no recovery is required.
At least one non network master NETWORK record required
Cause
No non network master NETWORK record was found when validating this network master
subsystem.
Effect
RDF does not start.
410 Messages