RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Recovery
Add one or more network records to the configuration describing the non network master
subsystem(s).
Audit is missing. Contact your HP analyst.
Cause
The COPYAUDIT command could not find audit that should exist in the local image trail.
Effect
The COPYAUDIT command aborts.
Recovery
There might be no recovery for this problem. To verify that required audit is missing from your
local image trail, contact your local HP analyst.
Aux audit support is only available with the RDF/IMPX product
Cause
You tried to have RDF/IMP protect a data volume associated with an auxiliary audit trail.
Effect
The SET or ADD command fails.
Recovery
RDF/IMPX must be installed do this.
Aux audit trail not found with index num
Cause
You tried to add an RDF object with an ATINDEX that does not correspond to the audit trail
number of a configured auxiliary audit trail.
Effect
The ADD command fails.
Recovery
Review and revise your RDF and TMF configurations.
Aux RECEIVER Record does not exist for atindex num
Cause
You tried to add an updater with the specified ATINDEX, but there is no receiver with that value.
Effect
The ADD command fails.
Recovery
Reenter the ADD command specifying a correct ATINDEX.
Backup node in network master record is incorrect primary system
Cause
The network master network record does not have the have the specified backup system name
for the local RDF subsystem.
Effect
Validation fails.
Recovery
You must reconfigure your network master.
BACKUPSYSTEM is Not Defined
RDFCOM Messages 411