RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Cause
The RDF configuration file is invalid.
Effect
The RDF configuration record was not added.
Recovery
Enter a SET RDF command, using the BACKUPSYSTEM parameter to identify the backup system.
Then, enter an ADD RDF command to add this system to the configuration.
BACKUPSYSTEM \node is Unavailable
node
is the name of the backup node that was unavailable.
Cause
Either the START RDF command failed because the backup node was unavailable, or the RDF
configuration file is invalid.
Effect
The command or requested operation fails.
Recovery
Examine the RDF configuration file, and correct it if necessary. Otherwise, reenter the START
RDF command when the backup node becomes available.
Broadcast ALTER Failed: error# on component
error#
is the file-system error number that identifies the specific error.
component
is the name of the RDF component for which the ALTER command failed.
Cause
An ALTER command failed for the specified components.
Effect
The command fails.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the command that encountered the
error. Otherwise, see your system manager.
Cannot delete NETWORK PNETTXVOLUME volume
volume
is the name of an RDF data volume.
Cause
You have attempted to delete an updater that protects the specified PNETTXVOLUME. This is not
allowed because it would break your RDF network.
Effect
Delete fails.
Recovery
If you really must delete the updater, you will then need to reconfigure your network master and
possibly your local configuration.
Configuration Validation Aborted
412 Messages