RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Cause
When a VALIDATE CONFIGURATION command is executed, RDFCOM determined that a user
specified spooler location for report generation is not a spooler location.
Effect
The command fails.
Recovery
Reenter the VALIDATE command with a valid filename or spooler location.
Invalid TMF shutdown timestamp
Cause
You entered an INITIALIZE RDF timestamp command, but specified the timestamp (or one or
more of its components) incorrectly.
Effect
RDF is not initialized.
Recovery
Examine the specified timestamp. If the format is correct, then the error arises from an incorrect
value for the date or time, such as 30 for hour or 32 for day. Correct the specified timestamp
and reenter the INITIALIZE RDF command.
The correct format for the timestamp is day month year hour:min, where:
day
is a number from 1 to 31.
month
is the first three letters of the month, such as JAN, FEB, MAR.
year
is a two-digit or four-digit number, such as 91 or 1991. Any year greater than 1999 must
be specified in four digits.
hour
is a number from 0 to 23.
min
is a number from 00 to 59. min must be preceded by a colon (:).
Library Conflict
Cause
A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect
The START RDF or TAKEOVER operation is aborted.
Recovery
If possible, correct the error and reenter the command that encountered the error. Otherwise,
see your system manager.
Library File Error: error#
error#
is the NEWPROCESS error number that identifies the specific error.
Cause
A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect
The START RDF or TAKEOVER operation is aborted.
430 Messages