RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Recovery
If you need to run in an RDF network, you need to obtain the RDF/IMPX license and product.
NETWORK record can only be added into a networked subsystem
Cause
An ADD NETWORK command was entered but the RDF NETWORK parameter is set OFF.
Effect
The ADD NETWORK command is rejected.
Recovery
Reconfigure RDF to have the RDF NETWORK parameter set ON.
Network record not found
Cause
The current RDF subsystem is configured in an RDF network, but a network record has not been
added.
Effect
Validation fails.
Recovery
You must add the appropriate NETWORK configuration record.
Network synch file ZRDFNETX file must be INCLUDED
Cause
An INCLUDE pattern has been specified that will cause audit records associated with the NetSynch
data file to be filtered out.
Effect
RDF can not be started.
Recovery
Correct the VOLUME INCLUDE associated with the PNETTXVOLUME so that the file
$volume.control-subvolume.ZRDFNETX is included.
Network synch file ZRDFNETX must not be EXCLUDED
Cause
An EXCLUDE pattern has been specified which will case audit associated with the NetSynch
data file to be filtered out.
Effect
RDF can not be started.
Recovery
Correct the VOLUME EXCLUDE associated with the PNETTXVOLUME so that the EXCLUDE pattern
does not exclude the file $volume.control-subvolume.ZRDFNETX.
No EXTRACTOR is Configured
Cause
The RDF configuration file is invalid.
Effect
The validation fails.
Recovery
Alter the configuration to include the extractor.
No EXTRACTOR is configured for ATINDEX atindex
434 Messages