RDF System Management Manual for J-series and H-series RVUs (RDF 1.10)

Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, see your system manager.
Only one Network record is allowed for a non-network master
Cause
Your current RDF configuration does not have the NetworkMaster attribute set and you have
tried to add more than one network record.
Effect
The configuration command fails.
Recovery
If the network record you have previously added pertains to the RDF network master subsystem,
then do not add any further network records. If the network record you have previously added
does not pertains to the RDF network master subsystem, then you need to purge your current
configuration, reinitialize, and reconfigure.
Only the SUPER group can execute this command
Cause
You issued a command restricted to members of the super ID group, but your logon ID does not
indicate that group.
Effect
The command fails.
Recovery
Select another command, or ask an authorized person in the super ID group to issue the command
for you.
Open error error# on filename
error#
is the file-system error number that identifies the specific error.
filename
is the name of the TMF Master Audit Trail (MAT).
Cause
An open error occurred on the TMF Master Audit Trail (MAT).
Effect
The file is not opened.
Recovery
See the Guardian Procedure Errors and Messages Manual for a description of the recovery
actions for the file-system error. Correct the error indicated by error#, then reenter the command.
Open error error# on MAPLOG file filename
error#
is the file-system error number that identifies the specific error.
filename
is the name of the updater maplog specified in the updater configuration.
Cause
RDFCOM was not able to open the updater maplog when an ADD VOLUME, ALTER VOLUME,
START RDF, or START UPDATE command was being executed.
RDFCOM Messages 437